Distribution

A two-stage automated individual heating substation for independent connection to the high-temperature circuit of the heating system. Maximum heating load of 50 kW.

The LGH-RVS-E is designed to simultaneously remove stale air from a commercial building and provide clean, filtered air. Additionally, Lossnay units recover valuable heat energy for maximum efficiency.

The Lossnay LGH-RVXT-E mechanical ventilation units with heat recovery (MVHR) are designed to provide clean air to any commercial building while removing stale air and, most importantly, recovering valuable heat energy for maximum efficiency. The reduced height makes it suitable for installation in ceiling spaces.

An individual heating substation with weather-compensated automation for independent connection to the high-temperature circuit of the heating system. Maximum heating load of 26 kW.

An individual heating substation with two-stage automation for independent connection to the high-temperature circuit of the heating system. Maximum heating load of 26 kW.

The Lossnay LGH-RVX-E units are designed to provide clean air to any commercial building while removing stale air. They also recover valuable heat energy for maximum efficiency.

The Lossnay VL-100(E)U5-E wall-mounted ventilation units use energy efficiently while simultaneously providing clean air to the room.

The Lossnay range of Mechanical Ventilation with Heat Recovery (MVHR) units creates a constant clean and healthy air environment in the home.

• The adjustable chassis and special frame are made with an aluminum coating.

• Provides high-speed long throw (up to 25 meters).

• Can be used for spot heating/cooling in large and high-ceilinged rooms.

• Has a maximum flow rate of 2000 m³/h, suitable for heights up to 8 meters.

• Can be adjusted at a 30º angle.

• Standard Material: 1 mm DKP sheet.
• Provides greater control in heating and cooling applications.
• Maintains constant pressure loss and noise level when the airflow direction is changed. Can activate the servo motor.
• Provides vertical or horizontal airflow according to the behavior of the cooled/heated air.
• Airflow is distributed from the side outlets during cooling and from the lower outlets during heating.
• Suitable for applications at heights of 4-15 meters.

• Standard Material: 1 mm DKP sheet.
• Can be used for supply air ducts.
• Designed for industrial applications.
• Suitable for applications up to a height of 3.5 meters.