Distribution

A thermosiphon system with flat collectors and a boiler for domestic hot water heating using solar energy. The Vitosol 111-F TS1 is a solar system with flat collectors and enamel-coated steel cylinders mounted above the collectors for domestic hot water heating.

The Vitocal 111-S split-type air-to-water heat pump consists of two separate units: the outdoor unit evaporates the surrounding air using refrigerant, which is brought to the required temperature for heating by the compressor. The heat is transferred to the indoor unit via a heat pipe, where it is delivered to the heating network through a condenser. The indoor unit is equipped with hydraulic components including a 3-way diverting valve, a secondary pump, and control for the heat pump.

An extremely quiet energy generator with A +++ energy ratings, designed for external installation in new construction and renovation of buildings, saving space.

The Vitocal 100-S split-type air-to-water heat pump consists of two separate units: the outdoor unit passes the surrounding air through an evaporator using refrigerant, which is heated to the required temperature by the compressor. The heat is transferred to the indoor unit via a heat pipe, where it is delivered to the heating network through a condenser. The indoor unit is equipped with hydraulic components including a 3-way diverting valve, a secondary pump, and controls for the heat pump.

The Vitocal 200-S is a split-type air-to-water heat pump. It extracts heat from the air and returns it at a suitable temperature level for heating. It delivers three to four times more energy for heating than the electrical energy it consumes. This heat pump can be ordered as either a heating system or as part of a heating-cooling system. The home's temperature can be comfortably regulated together with the ventilation system of the residential building. The Vitocal 200-S is particularly suitable for bivalent systems in new buildings or building renovations. For higher capacities, multiple Vitocal 200-S units can be cascaded.

Special design by Aktes with various power options such as 25,000, 45,000, and 60,000 kcal/hour.

Can operate with alternative fuels such as apricot pits and walnut shells.

Various power options: 20,000, 40,000, 60,000, and 75,000 kcal/hour

Pellet fuels made from materials such as compressed sawdust, wood chips, bark, agricultural products, straw, walnut, almond, and nut shells, as well as even paper waste, are economical and environmentally friendly.

The ULTRAFLOW 54 flow meters, along with a pair of temperature sensors, are used for measuring energy in water heating systems at temperatures ranging from 2°C to 180°C. The nominal flow range is from 0.6 m³/hour to 1000 m³/hour. They are used for commercial and technological accounting in residential and utility sectors (residential buildings, municipal buildings, central heating stations, heating substations) as well as in industrial and commercial facilities.

A compact ultrasonic heat meter with high accuracy. The meter's long lifespan and minimal maintenance reduce operational costs. The MULTICAL 402 is designed for measuring heating, cooling, and combined heating/cooling energy in closed water systems with temperatures ranging from 2°C to 130°C. The meter is used for calculating energy consumption in apartments, cottages, residential buildings, and small businesses.

Flamco PS steel storage tanks are designed for storing water in heating and cooling systems. They can also be used in water storage systems with a group of tanks.

Flamco PS steel storage tanks are designed for storing water in heating and cooling systems. They can also be used in water storage systems with a group of tanks.

Storage tank for hot drinking water. Suitable for use with Duo series indirect water heaters.

Storage tank for hot drinking water. Suitable for use with Duo series indirect water heaters.